Need advice? Speak to our sales experts:
UK: +44 (0) 191 587 8730 | US: +1-813-886-2775

For tech support please raise a support ticket

Product
Overview Specifications
& Manuals Standards &
Compliance Register
Your Product Service, Repair
and Calibration Software
and Firmware

Safetest 60+

SPECIFICATIONS & MANUALS

If you're looking for the Safetest 60+ datasheet featuring full technical specifications or the instruction manual, you can find them here.

Earth Continuity
Pre-pulse	2 wire ZAP technique
Pulse Shape	Exponential Decay
Decay Time	200 – 550μs to 5% of peak (0.1 to 0.8Ω respectively)
Method	Wire
Measurement Current	>± 200mADC into 2Ω
Max Test Voltage	4-24Vrms o/c
Measuring Range (Low Range)	0.001 – 0.999Ω
Resolution	0.1Ω
Measuring Range (Mid Range)	1.00 – 9.99Ω
Measuring Range (High Range)	10.0 – 19.9Ω
Accuracy	± 1% of value, ± 5mΩ ± 1% of value, ± 5mΩ
Circuit Protection	Test inhibited if ≥ 30VAC or DC at 4mm inputs

Insulation Resistance
Measurement	Point-to-point and EUT to Earth
Voltage	500VDC @1mA
Maximum O/C Voltage	<600VDC
Range	100K – 100MΩ ± 5% ± 2 Digits
Resolution	0.01MΩ
Short Circuit Current	<2mA

Powered Leakage Measurements
IEC 62353	Equipment Leakage (Direct)
IEC / AAMI 60601	Earth + Enclosure Leakage + Patient Leakage
NFPA-99	Ground + Chassis Leakage + Patient Leakage
IEC 61010	Touch Leakage, Touch Voltage
Test Voltage	Mains Supply Voltage
Measuring Range	0.1 - 9999μA (0.1 - 8000μA typical for IEC61010)
Measurement/Display Resolution	0.1μA
Accuracy	± 2%, ± 5μA
Mains Reversal	Soft Key
Single Fault Conditions	Open Neutral and Open Earth Via Soft Key
Frequency Response	IEC 60601 – 62353, NFPA-99, and IEC 61010 selectable

EUT Load Current Measurement
Range	0.0A – 20.0A
Resolution	0.1A
Accuracy	±5% ± 2 digits

Power Source
Maximum Current Rating	20A @ 120V / 16A @ 230V
Duty cycle (@21°C ambient)	16A to 20A, 3 min. on/ 10 min. off 10A to 15A, 3 min. on/ 5 min. off 0A to 10A, continuous
Mains Power	90-264V 48-64Hz

General Specifications
Weight	1.1kg/2lbs (unit) 2.2kg/5lbs (complete with accessories)
Size (L x W x D)	225 x 150 x 100mm / 9 x 6 x 4”
Operating Temperature	0 to 40°C
Humidity	0 – 98% Relative humidity, non-condensating
Storage Temperature	-10 to 50°C
Altitude	0 – 2000m
Ingress Protection	IP 40
Operating Pollution Degree	2, according to IEC 60529
Overvoltage Category	CAT II 300V

Earth Continuity
Pre-pulse	2 wire ZAP technique
Pulse Shape	Exponential Decay
Decay Time	200 – 550μs to 5% of peak (0.1 to 0.8Ω respectively)
Method	Wire
Measurement Current	>± 200mADC into 2Ω
Max Test Voltage	4-24Vrms o/c
Measuring Range (Low Range)	0.001 – 0.999Ω
Resolution	0.1Ω
Measuring Range (Mid Range)	1.00 – 9.99Ω
Measuring Range (High Range)	10.0 – 19.9Ω
Accuracy	± 1% of value, ± 5mΩ ± 1% of value, ± 5mΩ
Circuit Protection	Test inhibited if ≥ 30VAC or DC at 4mm inputs

Insulation Resistance
Measurement	Point-to-point and EUT to Earth
Voltage	500VDC @1mA
Maximum O/C Voltage	<600VDC
Range	100K – 100MΩ ± 5% ± 2 Digits
Resolution	0.01MΩ
Short Circuit Current	<2mA

Powered Leakage Measurements
IEC 62353	Equipment Leakage (Direct)
IEC / AAMI 60601	Earth + Enclosure Leakage + Patient Leakage
NFPA-99	Ground + Chassis Leakage + Patient Leakage
IEC 61010	Touch Leakage, Touch Voltage
Test Voltage	Mains Supply Voltage
Measuring Range	0.1 - 9999μA (0.1 - 8000μA typical for IEC61010)
Measurement/Display Resolution	0.1μA
Accuracy	± 2%, ± 5μA
Mains Reversal	Soft Key
Single Fault Conditions	Open Neutral and Open Earth Via Soft Key
Frequency Response	IEC 60601 – 62353, NFPA-99, and IEC 61010 selectable

EUT Load Current Measurement
Range	0.0A – 20.0A
Resolution	0.1A
Accuracy	±5% ± 2 digits

Power Source
Maximum Current Rating	20A @ 120V / 16A @ 230V
Duty cycle (@21°C ambient)	16A to 20A, 3 min. on/ 10 min. off 10A to 15A, 3 min. on/ 5 min. off 0A to 10A, continuous
Mains Power	90-264V 48-64Hz

General Specifications
Weight	1.1kg/2lbs (unit) 2.2kg/5lbs (complete with accessories)
Size (L x W x D)	225 x 150 x 100mm / 9 x 6 x 4”
Operating Temperature	0 to 40°C
Humidity	0 – 98% Relative humidity, non-condensating
Storage Temperature	-10 to 50°C
Altitude	0 – 2000m
Ingress Protection	IP 40
Operating Pollution Degree	2, according to IEC 60529
Overvoltage Category	CAT II 300V